Foosball.com Forums
Chat Area => Archives => Topic started by: LenSwitzer on January 07, 2008, 04:54:01 AM
-
Hi all,
I have just purchased a used Cooper table which I have assembled. It went together well enough but looking closely at the men I am not sure which side is the front and which is the back. I cannot tell from the head or body but there is a very small lip or ledge at the very bottom of the foot on one side only. The lip runs along the bottom of the foot and is small; maybe 1/2 millimeter in size. The other side of the foot has a slightly rounded corner to it and has no lip. Would this lip face toward the front or back? I cannot guess and I thought I would ask.
Thanks,
Len
-
Do the men attach to the rod with a screw and nut, or with a roll pin. If they use a screw and nut, there is usually a hexoganal inset for the nut, that side should be the back of the man, the screw head should be toward the front. If it is a roll pin, I would need to see the man to tell for sure. I will search the web for some pictures and try to get ack to you asap.
Pat R
-
It is a bolt and nut. The nut should be toward the back, eh. Thank you very much for your help.
Len
-
No problem Len. Good luck with the table assembly and have fun playing!!
Pat R