Foosball.com Forums
Chat Area => General Chat => Topic started by: DrNoisewater on December 18, 2014, 08:20:11 AM
-
Does anyone have information on how a ball trap assembly for an older Tornado coin op is supposed to work? Perhaps instructions on assembling if buying a new gate assembly? Or pictures of a working assembly showing how the rod assembly fits with the gate assembly?
I bought a used gray marble table and everything is there, seems like it should work, but the ball trap/esd coin chute just won't push completely to bring the ball trap vertical. I am thinking it may just be misaligned or something, but not sure how it is supposed to work/be put together.
Thanks.
-
It would be helpful if you post a pic of your mechanism.
-
Exploded parts diagrams of coin-op tables from Tornado website:
http://www.valley-dynamoparts.com/docs/Tornado_BD_2010_Online.pdf
-
I have viewed the schematic provided by Valley, but unfortunately it doesn't show how the parts really go together.
Here are a couple of pictures. Hard to see down into the gate assembly very well.
Thanks
(http://i.imgur.com/ogYyGP8l.jpg)
(http://i.imgur.com/wpTW1R5l.jpg)
-
I think the roller need to be under/in front of the pivoting arm
-
When you push coin mech in the arm drops behind roller and when you pull it out it spins the ball trap
-
Think I follow you. Will see if I can adjust it, but may have to wait on delivery of cash box key, so can complete disassemble and reassemble.
Thanks for the feedback.