Foosball.com Forums

I'm looking for some foosball tables

0 Members and 1 Guest are viewing this topic.

I'm looking for some foosball tables
« on: August 25, 2009, 10:41:14 AM »

I'm looking to purchase multiple foosball tables.
I'm in Cleveland Ohio.....

I would like one of each of the following:

A Garlando G-5000 or similar Garlando Table in any finish
A Tornado Grey-Marble Coin-Op, or perhaps an older Brown Marble finish if in good condition.
A Bonzini B-90 in any finish
A Rene` Pierre table, any finish
A Deutscher Meister professional table.
A Futbolin Val table, any finish.

If you have one of the above, let me know the condition, and asking price, and I'll come by and take a look!

Thanks.

Offline BillV

Re: I'm looking for some foosball tables
« Reply #1 on: August 27, 2009, 02:46:23 PM »
Shawn, what's up. Still laying tile?

BillV

Offline bbtuna

  • 1465
  • TS, Dynamo, Tornado, Warrior, & Fireball
Re: I'm looking for some foosball tables
« Reply #2 on: August 27, 2009, 03:24:13 PM »
you saw the Grey Marble offered by Zeek right?

Re: I'm looking for some foosball tables
« Reply #3 on: August 31, 2009, 07:16:16 PM »
i would take 750 for my grey marble coin op if you will pay the shipping. it has the new men and handles on the 2 & 3 rods also the clear side strips. has one small ding on the cabinet (cant see it). other wise excellent shape. plays just like a platinum.

Offline bbtuna

  • 1465
  • TS, Dynamo, Tornado, Warrior, & Fireball
Re: I'm looking for some foosball tables
« Reply #4 on: September 01, 2009, 10:12:29 AM »
Zeek, does it have the new bearings on any of the rods?

Re: I'm looking for some foosball tables
« Reply #5 on: September 02, 2009, 01:48:02 PM »
not sure i know what the new bearings look like. can you describe

Offline bbtuna

  • 1465
  • TS, Dynamo, Tornado, Warrior, & Fireball
Re: I'm looking for some foosball tables
« Reply #6 on: September 02, 2009, 04:53:48 PM »
you would know because you would have had to purchase them to put on the table...the split halves, which face out toward table, have been trimmed down so that the ball won't pass behind the man on a tight tight stick wall...a some point, the bumpers got just a little larger and so the ball would pass behind...so they looked at making the bumper smaller or the bearing "thinner" and they choose the bearing

Pre-Production working prototype


Current Production version

Re: I'm looking for some foosball tables
« Reply #7 on: September 09, 2009, 12:52:50 AM »
I have a Rene Pierre 2000 LeChampion in great condition.

zack ziegler
501-551-0710