Foosball.com Forums

Need a Garlando 3-rod, solid through rod, non-telescoping

0 Members and 2 Guests are viewing this topic.

Need a Garlando 3-rod, solid through rod, non-telescoping
« on: October 17, 2011, 05:00:19 AM »
Anyone know where in the U.S. I can order one?

Re: Need a Garlando 3-rod, solid through rod, non-telescoping
« Reply #1 on: October 17, 2011, 12:33:05 PM »
I think Alan Cribbs is, or used to be, the Garlando distributor for the US. He's on this board, and also runs Bonzini USA.

Re: Need a Garlando 3-rod, solid through rod, non-telescoping
« Reply #2 on: October 17, 2011, 02:55:16 PM »
I know Alan Cribbs personally but I'm not aware that he has anything to do with Garlando.

Re: Need a Garlando 3-rod, solid through rod, non-telescoping
« Reply #3 on: October 17, 2011, 08:49:38 PM »
Hmm... maybe my memory is fuzzy on that one, but I remember dealing with attempting to get a Garlando over to Canada from someone in Bonzini USA; I think they were also the exclusive dealers for JGC's Eurosoccer as well when that was an ITSF table,

Anyways, according to the ITSF site, the US Garlando distributor is now:

USA
IMPERIAL INTERNATIONAL Contact person: Mr. Stewart Helfgott
Address
621 W. Route 46 (Whse 2)
HASBROUCK HEIGHTS, NJ 07604
Mail
shelfgott@imperialusa.com
Website
www.imperialusa.com

I'd start there.

Re: Need a Garlando 3-rod, solid through rod, non-telescoping
« Reply #4 on: October 18, 2011, 12:16:42 AM »
Garlando World Cup Table for sell!
$800.00

Mint condition

Alan Cribbs

Re: Need a Garlando 3-rod, solid through rod, non-telescoping
« Reply #5 on: January 23, 2012, 03:22:40 PM »
Garlando World Cup Table for sell!
$800.00

Mint condition

Alan Cribbs

Is the table still on sale?

Re: Need a Garlando 3-rod, solid through rod, non-telescoping
« Reply #6 on: January 24, 2012, 11:27:22 PM »
Yes!

Re: Need a Garlando 3-rod, solid through rod, non-telescoping
« Reply #7 on: February 02, 2012, 12:28:42 AM »
Do I have to pay for shipping also? I live in San Ysidro, CA 92173.

I am thinking on buying an 8 year old Dynamo Table Grey Marble, for maybe 500 or 400. It has the Dynamo men that look like Tornado men. It is the old high end table with leg levelers wood handles etc.

Oh and do I have to say goodbye to all my bank shots with Garlando?


Re: Need a Garlando 3-rod, solid through rod, non-telescoping
« Reply #8 on: February 02, 2012, 03:00:42 AM »
garabdorge, not to hijack the thread, but would you provide me with a quick description of how to perform a bank shot on a Garlando?  I have a newer one with the 'pinny' feet and can't seem to manage it.  Where do you place the ball - more behind the rod or in front? I guess the ball is struck on its side, but do you push/pull the rod at the same time in the direction of the intended bank to give it the angle or is the rod spun standing still laterally?

Any recommendations would be appreciated.  Thanks

Re: Need a Garlando 3-rod, solid through rod, non-telescoping
« Reply #9 on: February 02, 2012, 11:13:12 AM »
I would'nt know, I was asking Alan because I have read that bank shots are a NO in Garlando tables, but I want to hear it from someone that has own one. The problem is in the ramps as I have read not in the pinny feet. I was being hopefull he he
« Last Edit: February 02, 2012, 02:13:22 PM by garabdorje »

Re: Need a Garlando 3-rod, solid through rod, non-telescoping
« Reply #10 on: February 02, 2012, 02:55:59 PM »
Since I started this thread, having very little to do with the way the thread has progressed, I would just like to say that I found some Garlando 3-rods, both telescoping and through rods, but I finally went with the telescoping because I found a way to mount it to my Fireball.

Now, since I myself am an aficionado of the bank shot from the 3-man position, I will tell you that I have no problem hitting the bank shot with a Garlando-3 and an ITSF-B ball on my Fireball. Now whether it is ALLOWED in Italian rules, I couldn't say, and on an actual Garlando table, with the ramps on the sides, the ball might as well launch off the table. The men however cause no issue.

Re: Need a Garlando 3-rod, solid through rod, non-telescoping
« Reply #11 on: February 02, 2012, 02:58:27 PM »
To add to that,

WILL SOMEBODY PLEASE BUY ALAN'S TABLE!

Re: Need a Garlando 3-rod, solid through rod, non-telescoping
« Reply #12 on: February 02, 2012, 04:12:06 PM »
I am interested but I wont be able to pay for shipping I cant afford it. Also I want to make sure if I will or will not be able to make bank shots.

Offline FOOZUL

  • 126
Re: Need a Garlando 3-rod, solid through rod, non-telescoping
« Reply #13 on: February 02, 2012, 04:26:59 PM »
Watch some games played on a Garlando on youtube then decide...But the best table right now for bank-shots in the US is Fireball...

Re: Need a Garlando 3-rod, solid through rod, non-telescoping
« Reply #14 on: February 02, 2012, 05:29:15 PM »
I did watch some games one YouTube but I haven't seen any bank shots.