Foosball.com Forums

Washer config on old TS Million Dollar Game table

0 Members and 1 Guest are viewing this topic.

Washer config on old TS Million Dollar Game table
« on: November 10, 2014, 02:37:11 PM »
Hi Everyone -

Quick question.  The washer set up on my old TS Million Dollar Game table - Brown Top, is set up from table in towards the man as follows:

Metal, Bumper, Plastic, Foosball Man

I ask, because when my step-son is playing his goalie, the metal washer is getting hung up on the chrome face plate.  The Metal washer fits just inside of the mounting screws, and it is causing a grind on the rod.  Now, considering that he is 8 years old, I am sure it has to do with him pushing the rods out way to wide playing the goalie.  But I wanted to check and see if anyone had any ideas, or if someone changed the washer set up not knowing what they were doing.

All the photos I can find on-line seem to have the metal washer to the outside, and the plastic closest to the Foosball Man.

Appreciate the help,

Geoff

Re: Washer config on old TS Million Dollar Game table
« Reply #1 on: November 11, 2014, 10:16:07 AM »
« Last Edit: November 11, 2014, 11:23:13 AM by johnwallan »

Re: Washer config on old TS Million Dollar Game table
« Reply #2 on: November 11, 2014, 10:18:42 AM »
wall face stainless, nylon, rubber, metal, figure... in case the link fails...

Re: Washer config on old TS Million Dollar Game table
« Reply #3 on: November 11, 2014, 04:06:55 PM »
Thanks for the reply.  I thought they had them set up incorrectly when I got the table, but ever photo I could find of a Brown Top, was too out of focus to see clearly.  I figured someone in here would know.

I guess I know what I will be doing tonight.

Appreciate the help!