Rene Pierre rod sticks

0 Members and 1 Guest are viewing this topic.

Rene Pierre rod sticks
« on: November 14, 2021, 11:56:01 AM »
I have a Rene Pierre Black Match table with telescoping rods. Several of the rods have begun to stick. When you first start to move them back and forth they resist for a few inches then move smoothly. The table is only a few years old.

Offline alaskan thunder

  • *
  • 572
Re: Rene Pierre rod sticks
« Reply #1 on: November 18, 2021, 02:57:48 PM »
Have you cleaned and lubricated them?

Offline Tim

  • *
  • 14
  • lives in Ohio, USA
Re: Rene Pierre rod sticks
« Reply #2 on: November 19, 2021, 11:14:53 AM »
I have never owned a table with telescoping rods; but when buying a table for home I did a lot of research.  I remember reading where these types can build up "gunk" inbetween the rods... and possibly rust. The suggested occasional maintenance was to unslide the inner & outer rods from each other and clean them well.  Someone had a brush (the diameter of the outer rods I.D.) with a 2 foot wire handle,  and it was run in through the outer rods cavity.

I looked for a link and can not find it anymore.