Foosball.com Forums

T3000 Surface Question

0 Members and 1 Guest are viewing this topic.

T3000 Surface Question
« on: August 04, 2023, 10:13:23 AM »
Hi. I am considering purchasing a T-3000 where I can't personally inspect beforehand.  I was wondering if anyone has an opinion on this play surface.  I see lines about a quarter inch into the surface on left and right sides and am curious if this could be warping or damage or is just standard? 

https://flic.kr/ps/42J8Gz

Any insight or opinions are appreciated. 

Re: T3000 Surface Question
« Reply #1 on: August 04, 2023, 10:38:48 PM »
Perfectly normal - those lines are the side strips to keep the ball off the wall. See image here: https://foosgear.com/products/playfield-side-strip-2pc

Offline Tim

  • *
  • 14
  • lives in Ohio, USA
Re: T3000 Surface Question
« Reply #2 on: August 25, 2023, 03:58:32 PM »
Looks good to me.

I'd check for play surface warping as well.

Here's some help on table ID:
https://timzfooz.com/tech/Tornado-ID.html


Re: T3000 Surface Question
« Reply #3 on: December 01, 2023, 03:39:26 AM »
Looks good to me.

I'd check for play surface warping as well.

Here's some help on table ID:
https://timzfooz.com/tech/Tornado-ID.htmlgetting over it

Great  :D

Re: T3000 Surface Question
« Reply #4 on: December 06, 2023, 07:39:44 PM »
Perfectly normal - those lines are the side strips to keep the ball off the wall. See image here: https://foosgear.com/products/playfield-side-strip-2pc Run 3
Okey.Thank bro !!